Product description
Cli-Mate Mini Controller 2x600W 3A: measuring, monitoring and adjusting
The Cli-Mate Mini Controller 2x600W 3A is a relay box and climate controller in one compact unit. It switches your lighting with a built-in time clock and relay, controls your extraction fan by temperature and can also drive a heater – so light, ventilation and temperature in your grow room are managed from one box.
Key features
Lighting: built-in time clock with relay for 2 lamp outputs of max. 600 W each – lamps switch on and off safely at the times you set
Fan control up to 3 A: separate dials for minimum and maximum fan speed
Adjustable temperature band: 1 to 8 °C
3-position fan switch: 100% / automatic (holds the set temperature) / off
Heater contact (max. 3500 W): keeps the temperature at the set value during the dark period
Permanent outlet: for e.g. a circulation fan, measuring device or water pump – no extra cable needed
Plug-and-play, analogue operation, fuse-protected
Suitable for
Grow tents and grow rooms with one or two lamps of up to 600 W
Extraction fans up to 3 A
Setups that need a heater during the dark period
Use / installation
Connect the lamps to the lamp outputs and set the on/off times on the time clock
Connect the extraction fan and set minimum speed, maximum speed and temperature band
Connect a heater to the heater contact if needed
Place the temperature sensor in the tent, not directly under the lamp
Do not exceed the stated loads
Technical details
Model: Cli-Mate Mini Controller 2x600W 3A
Lamp outputs: 2 × max. 600 W
Fan output: max. 3 A
Heater contact: max. 3500 W
Temperature range: 5–55 °C
Power supply: 220–240 V, 50 Hz, single-phase
Protection rating: IP44
Dimensions: 250 × 220 × 120 mm
