Product description
PE Elbow 90° 20 mm – right-angle turn for 20 mm irrigation pipe
Running a 20 mm feed line around benches, trays or room corners? Bending that pipe by hand usually ends in a flattened section and less water further down. The 20 mm 90° elbow solves it with a solid change of direction that keeps the full bore open.
Why it matters for flow
Every kink is a restriction. On a line with a dozen drippers, a squeezed corner near the start means the last plants get noticeably less. With a proper elbow the pipe stays round, the flow stays even and you don't have to compensate by running the pump longer.
A tidy room
Elbows let you keep pipes along walls and bench edges instead of across the floor. That makes the room easier to clean, you won't trip over a line, and it's quicker to spot a leak when every pipe follows a clear route.
How to fit it
Cut the 20 mm pipe square with a sharp pipe cutter or knife. Push or tighten both ends into the elbow until they're seated all the way. Then run water through the line and check the joint before you connect your drippers. Marking the corners on a sketch first tells you how many elbows to order.
Specifications
- Pipe size: 20 mm PE
- Shape: 90° elbow
- Material: PE / plastic
