Product description
PE T-Joint 20 mm – branch fitting for mid-size irrigation lines
A 20 mm line is where many growers end up once 16 mm starts to feel tight: more flow, but still compact and easy to lay out. This 20 mm PE tee splits that line into two, so you can feed two rows, two benches or two rooms from one supply.
Why 20 mm
If you've got a long row of drippers, the plants at the far end of a thin line can end up with less. Moving to 20 mm for the distribution line and branching off with tees keeps more water moving to every section. It's also a common size for feed circuits from a central tank to several tents.
Plan before you cut
Sketch your layout on paper first: mark every split, corner and line end. That tells you exactly how many tees, elbows and end pieces to order, and saves a second delivery. Then cut the pipe square with a sharp cutter, push or tighten all three ends fully into the tee and run water through. Check each joint for drips before connecting your emitters.
Specifications
- Pipe size: 20 mm PE
- Shape: T-joint (tee)
- Material: PE / plastic, water-resistant
Combine it with matching 20 mm elbows, connectors, end pieces and threaded adapters from the same range to build drip networks or run-to-waste lines to your own design.
