Product description
Tank Connector 25 mm x 1" Male Thread: product details and use
With the Tank Connector 25 mm x 1" male thread you create a watertight outlet through the wall of your reservoir or water tank. This bulkhead fitting combines a 1" outer thread with a 25 mm connection, so you can hook up PE pipe or 1" fittings directly to your feed tank.
A must-have for growers who want to feed from a central tank, drain a reservoir easily or build a gravity-fed or pump-driven irrigation system.
Key benefits at a glance
- Watertight outlet: turn any reservoir or water tank into a proper feed tank.
- Two connection options: 1" outer thread plus a 25 mm connection.
- Easy to fit: drill a hole, fit the connector and tighten the nut.
- Robust plastic: made for water and nutrient solution.
- Versatile: for feed tanks, drain points and run-to-waste set-ups.
Specifications
- Type: tank connector / bulkhead fitting
- Pipe size: 25 mm
- Thread: 1" male (outer)
- Material: plastic
How to use
Choose a spot low on the tank wall and drill a hole of the right size for the connector. Fit the connector through the wall with the seal on the inside, then tighten the nut from the outside until the joint is firm. Connect your 25 mm pipe or a 1" fitting, such as a valve or tap.
Fill the tank and check the outlet for leaks before you connect your pump or irrigation line.
Tank Connector 25 mm x 1" – a clean, leak-free outlet for every feed tank.
